Volume 6 (2024)
Volume 5 (2023)
Volume 4 (2022)
Volume 3 (2021)
Volume 2 (2020)
Volume 1 (2019)
Number of Articles: 153
Biodiesel Production Using a Photocatalytic Process: A Review
Volume 5, Issue 1 , January 2023, , Pages 1-15
Abstract
There is a growing demand for use of alternative clean energy as against fossil fuel. In trying to meet these demands, researchers are investigating various approaches towards delivering ... Read MoreA new strategy for the synthesis of dihydropyrano[c]chromene using zinc oxide/copper oxide as a nano and efficient catalyst
Volume 4, Issue 1 , January 2022, , Pages 1-10
Abstract
In recent years, dihydropyrano[3.2c]-chromene derivatives have attracted much attention among many researchers, due to their wide range of biological and pharmaceutical properties, ... Read MorePolymer-based Material for Lithium-Ion Batteries: Structure, Material Engineering, Device Performance and Challenges (Review)
Volume 1, Issue 1 , January 2019, , Pages 1-26
Abstract
Batteries are a major technological challenge in this new century as they are a key method to make use of energy efficiently. Nowadays Lithium-ion batteries (LIBs) appeared to be one ... Read MorePhotocatalytic degradation of malachite green dye under UV light irradiation using calcium-doped ceria nanoparticles
Volume 2, Issue 1 , January 2020, , Pages 1-14
Abstract
In this study, photocatalytic activity of Ca-doped ceria (CDC) for malachite green (MG) degradation was investigated. CDC was successfully synthesized via co-precipitation method using ... Read MoreSurface potential, fermi level and band gap energy of copper doped magnesium nickel ferrite nanoparticles
Volume 3, Issue 1 , January 2021, , Pages 1-14
Abstract
Optical, electrical, and electronic properties of materials are essential in the fabrication of electronic devices. These properties can be improved through doping and reduction of ... Read MoreFabrication of various morphologies of MnO2 nanostructures on biochar support for dye removal application
Volume 6, Issue 1 , January 2024, , Pages 1-11
Abstract
Biochar is a cost-effective and porous material with high carbon content. It is considered as an effective supporting matrix owing to its high specific surface area and notable ion ... Read MoreThe influence of gamma irradiation 60Co On CoSe/Ag nanostructures material deposited via electrochemical deposition technique for photovoltaic application
Volume 4, Issue 1 , January 2022, , Pages 11-21
Abstract
This study aimed at investigating the influence of Gamma-irradiation 60Co on CoSe/Ag nanostructures material deposited on a transparent conducting substrate via electrochemical deposition ... Read MoreFractal Pattern Similar to Hepatocellular Carcinoma (FPS-HCC) in the Mandelbrot set
Volume 6, Issue 1 , January 2024, , Pages 12-19
Abstract
Hepatocellular carcinoma (HCC) is one of the deadliest types of cancer. The HCC is the most common (80%) of all primary liver cancers with mortality rate of 4.5 per 100 000 person/year. ... Read MoreAntifungal activity of biosynthesized CuO nanoparticles using leaves extract of Moringa oleifera and their structural characterizations
Volume 2, Issue 1 , January 2020, , Pages 15-23
Abstract
Copper oxide nanoparticles (CuONPs) were synthesized using Moringa oleifera leaf extract via a simple green chemistry approach. The prepared CuONPs were characterized using X-ray diffraction ... Read MoreAnalysis of structural, and electronic properties of clopidogrel drug adsorption on armchair (5, 5) Single-walled carbon nanotube
Volume 3, Issue 1 , January 2021, , Pages 15-30
Abstract
Single-walled carbon nanotubes (SWCNTs) have been widely utilized in many types of applications, cinfirming their excellent role as carriers of drugs with a highly site-selective delivery ... Read MoreEffect of silica nanoparticles modified with different concentrations of stearic acid on microstructure, mechanical & electrical properties of RTV-2 silicone rubber nanocomposite
Volume 5, Issue 1 , January 2023, , Pages 16-32
Abstract
One of the main challenges in preparing ceramic-reinforced polymer nanocomposites is the agglomeration of nanoparticles. This problem has been solved by surface modification of nanoparticles. ... Read MoreStatistical analysis of IDC breast cancer and its representation with Koch fractal curves to prognosis
Volume 6, Issue 1 , January 2024, , Pages 20-30
Abstract
Invasive ductal carcinoma (IDC) breast cancer is one of the most common types of breast cancer among women, with a relatively high mortality rate. Introducing new diagnostic methods ... Read MoreInvestigating the properties of cobalt phosphate nanoparticles synthesized by co-precipitation method
Volume 4, Issue 1 , January 2022, , Pages 22-35
Abstract
Cobalt phosphate (Co3(PO4)2) nanoparticles of varying precursor concentrations were extracted successfully by co-precipitation method and fabricated on the stainless and glass substrates ... Read MoreMagnetic nanoparticles - a promising tool for targeted drug delivery system
Volume 2, Issue 1 , January 2020, , Pages 24-37
Abstract
Over the last decade, nanotechnology has brought great development in the biomedical field. This study reviewed some physical and chemical characteristic of magnetic nanoparticles that ... Read MoreFacile Preparation of Novel Zinc Oxide Nano Sheets and Study of Its Optical Properties
Volume 1, Issue 1 , January 2019, , Pages 27-36
Abstract
The zinc oxide nano sheets were prepared by zinc sulfate and sodium hydroxide via precipitated method and, then, calcinated at 300 oC. In order to have a reliable characterization of ... Read MoreTiCl3-silica: A recyclable solid support for efficient synthesis of substituted imidazoles
Volume 3, Issue 1 , January 2021, , Pages 31-45
Abstract
In this research study, a library of highly substituted imidazoles were efficiently synthesized from benzil/benzoin, aldehydes and ammonium acetate via multicomponent solvent free one ... Read MoreSynthesis of 4-hydroxycoumarin and 3-acetyl-4-hydroxycoumarin in the presence and absence of ultrasonic bath and evaluation of their anticoagulant effects
Volume 6, Issue 1 , January 2024, , Pages 31-45
Abstract
Biochar is a cost-effective and porous material with high carbon content. It is considered as an effective supporting matrix owing to its high specific surface area and notable ion ... Read MoreHot electron in visible-light-induced plasmonic photocatalysis by AuNP/TiO2 −A Review
Volume 5, Issue 1 , January 2023, , Pages 33-52
Abstract
AuNP/TiO2 nanocomposite is promising for developing visible-light-induced plasmonic photocatalysis. The effective hot electron generation and inhabitation of electron-hole recombination ... Read MoreInvestigation and synthesis of Fe doped Al2O3 nanoparticles by Co-precipitation and sol gel methods
Volume 4, Issue 1 , January 2022, , Pages 36-47
Abstract
This study doped alumina with iron impurities by co-precipitation and sol-gel methods compared with pure alumina. Precursors of aluminum and iron metal salts employ the surfactant and ... Read MoreEmbedded Ag NPs in Cysteine-Poly (acrylic acid) Hydrogel with Antibacterial Activity
Volume 1, Issue 1 , January 2019, , Pages 37-48
Abstract
In this research,Ag NPs were loaded on cysteine modified poly(acrylic acid) (PAA) hydrogel. Obtainedcysteine-hydrogel (Chydrogel) having different functional groups could stabilize ... Read MoreBio-synthesis of iron oxide nanoparticles using neem leaf cake extract and its influence in the agronomical traits of vigna mungo plant
Volume 2, Issue 1 , January 2020, , Pages 38-46
Abstract
In this work reports the synthesis of iron oxide along with the complex formation from the neem cake using the biosynthesis and precipitation method. Ferrous sulphate (FeSO4) and sodium ... Read MoreNiO nanoparticle/1-hexyl-3-methylimidazolium hexafluorophosphate composite for amplification of epinephrine electrochemical sensor
Volume 3, Issue 1 , January 2021, , Pages 46-52
Abstract
In this research study, NiO nanoparticle (NiO-NPs) was synthesis using a simple strategy method (chemical precipitation), then it was utilized for amplification of paste electrode (PE) ... Read MoreEffect of deposition potential on the structural and optical properties of electrodeposited antimony doped zinc telluride (Sb:ZnTe) thin films for optoelectronic applications
Volume 6, Issue 1 , January 2024, , Pages 46-63
Abstract
Thin films of antimony-doped zinc telluride (Sb:ZnTe) were produced using an electrodeposition method. The examination included both the structural and optical characteristics, as well ... Read MoreInfluence of atomizing voltage on fluorine doped tin oxide via spray pyrolysis technique
Volume 2, Issue 1 , January 2020, , Pages 47-57
Abstract
Synthesis and characterization fluorine-doped tin oxide thin film using spray pyrolysis were coated on a glass substrate by varying the atomizing voltage. The XRD analysis was carried ... Read MoreFundamental features of quantum dots and their diagnostic applications
Volume 4, Issue 1 , January 2022, , Pages 48-62